How to install

Peel & Stick and Commercial Vinyl Installation Guide

Before Installation:

  1. Unroll & Acclimate: Remove wallpaper from packaging and unroll slightly. Let it sit unrolled for 48 hours to acclimate.

Tools Needed:

  • Spirit level
  • Pencil
  • Squeegee (included)
  • Masking tape
  • Ladder or step stool
  • Utility knife

Conditions:

  • Do not apply to walls painted within the last 14 days.
  • Ideal room temperature: 59°F to 83°F (15°C to 28°C).

Step 1: Wall Preparation

  1. Ensure the wall is clean, dry, and smooth. Use a mixture of 1/4 cup white vinegar and 4 cups warm water for cleaning. Avoid strong chemicals.
  2. Repair any wall imperfections. Use a light-colored primer or paint if needed.
  3. Remove electrical outlets and skirting boards as necessary.

Step 2: Wallpaper Preparation

  1. Check that you have the correct number of rolls with matching designs and colors. Ensure the rolls are in sequence.
  2. Unroll and flatten the wallpaper on a flat surface, design side up, for 60 to 90 minutes.

Step 3: Installation

  1. Draw a straight vertical line on the wall with a spirit level.
  2. Position the first wallpaper sheet along the line, using masking tape to secure it. Align the sheet 4 inches higher and to the left to account for wall imperfections.
  3. Peel off a 12-inch section of backing paper from the top. Press the sheet onto the wall and remove the rest of the backing while smoothing the sheet downward.
  4. If necessary, peel off and reposition any sections for a perfect application. Use a needle to remove air bubbles.
  5. Ensure subsequent sheets align without overlapping. Trim excess with a utility knife.

Care & Maintenance:

  • Clean with a damp cloth. Avoid washing and be cautious with grease or oil stains.

Wallpaper Removal:

  • Peel sheets from top to bottom at a 120-degree angle. Note that any damage or issues during removal are not covered.

Enjoy your newly designed space!


Traditional Wallpaper Installation Guide

Before Installation:

  • Acclimate: Remove wallpaper from packaging and unroll slightly. Let it sit for at least 48 hours to adjust to room temperature.
    •

    Tools Needed:

  • Spirit level
    •
  • Pencil
    •
  • Squeegee (included)
    •
  • Roller or paintbrush
    •
  • Wallpaper glue
    •
  • Sponge
    •
  • Ladder or step stool
    •
  • Utility knife
    •

    Conditions:

  • Do not apply to walls painted within the last 14 days.
    •
  • Ideal room temperature: 59°F to 83°F.
    •

    Step 1: Wall Preparation

  • Ensure the wall is clean, dry, and smooth. Clean with a vinegar-water solution if needed. Repair and prime uneven areas.
    •
  • Remove electrical outlets and skirting boards.
    •

    Step 2: Wallpaper Preparation

  • Confirm you have matching rolls with sequential numbers. Unfold rolls on a flat surface, design side up, for 60 to 90 minutes to flatten.
    •

    Step 3: Installation

  • Draw a vertical line on the wall with a spirit level.
    •
  • Apply glue to the wall with a roller or paintbrush.
    •
  • Align the first sheet with the line and attach it to the wall. Smooth out bubbles with a squeegee.
    •
  • Add more sheets, ensuring edges meet without overlapping. Clean excess glue with a sponge.
    •
  • Trim excess wallpaper with a utility knife.
    •

    Enjoy your beautifully wallpapered space!